Open Journal Systems

A brief review on systematic approach to polymer selection for development of capillary/hollow-fibre membrane for practical applications

Vijay Suresh Mamtani, Asim Kumar Ghosh, Asis Kumar Adak

Abstract

Polymeric membranes are widely used for treatment of lean stream in chemical process industries. These membranes are used in different configurations such as tubular, plate & frame, disc-tube, spiral and capillary/hollow-fibre. Membrane modules with capillary/hollow-fibre configuration appears promising in ultrafiltration applications due to its relatively higher packing density, ease of backwashing, ease of cleaning and lower pressure drops since it can be operated at laminar flow regime with high cross-flow velocity. Hence, efforts are being made by researchers to make capillary/hollow-fibre membrane modules from various polymers, ranging from most hydrophilic polyacrylonitrile (PAN) to super-hydrophobic polypropylene (PP) and polytetrafluorethylene (PTFE). Here, we discuss the qualifying properties of the polymeric materials suitable to spin into capillary/hollow-fibre ultrafiltration membranes. Selection of polymers for making fibres requires in-depth knowledge of properties of base polymer and its processability/fabricability. The important properties to be considered for making capillary/hollow-fibre membrane are intrinsic structural properties of the base polymer like degree of crystallinity, tensile strength, tensile modulus, etc. The functional properties such as permeability, hydrophilicity/hydrophobicity etc. also plays role in selecting polymer for a given application. The polymer should also have appreciable dissolution in available solvents or should have degradation temperature higher than melting point so that it can be processed through appropriate membrane preparation process.


Keywords

Polymers; membranes; capillary; hollow-fibre; ultrafiltration

Full Text:

PDF

References

1. Ahmed I, Yusof ZAM, Beg M. Fabrication of polymer-based mix matrix membrane—A short review. International Journal of Basic & Applied Sciences 2010; 10(2): 17–27.

2. Prabhakar S, Ghosh AK, Bindal RC, Tewari PK. Outside skin tubular ultrafiltration membranes for separation of proteins and polysaccharides and removal of turbidity from seawater. Desalination and Water Treatment 2011; 27(1–3): 231–236. doi: 10.5004/dwt.2011.2578

3. Mulder M. Basic Principles of Membrane Technology, 2nd ed. Springer; 1996.

4. Anokhina T, Raeva A, Makaev S, et al. Express method of preparation of hollow fiber membrane samples for spinning solution optimization: Polysulfone as example. Membranes 2021; 11(6): 396. doi: 10.3390/membranes11060396

5. Plisko TV, Bildyukevich AV, Zhao L, et al. Formation of polysulfone hollow fiber membranes using the systems with lower critical solution temperature. Fibers 2021; 9(5): 28. doi: 10.3390/fib9050028

6. Alsalhy QF, Salih AH, Simone S, et al. Poly(ether sulfone) (PES) hollow-fiber membranes prepared from various spinning parameters. Desalination 2014; 345: 21–35. doi: 10.1016/j.desal.2014.04.029

7. Uebele S, Johann KS, Goetz T, et al. Poly(ether sulfone) hollow fiber membranes prepared via nonsolvent-induced phase separation using the green solvent Agnique® AMD 3 L. Journal of Applied Polymer Science 2021; 138(37): e50935. doi: 10.1002/app.50935

8. Matsuyama H, Hayashi K, Maki T, et al. Effect of polymer density on polyethylene hollow fiber membrane formation via thermally induced phase separation. Journal of Applied Polymer Science 2004; 93(1): 471–474. doi: 10.1002/app.20461

9. Kim J, Kim SS, Park M, Jang M. Effects of precursor properties on the preparation of polyethylene hollow fiber membranes by stretching. Journal of Membrane Science 2008; 318(1–2): 201–209. doi: 10.1016/j.memsci.2008.02.050

10. Mei S, Xiao C, Hu X. Preparation of porous PVC membrane via a phase inversion method from PVC/DMAc/water/additives. Journal of Applied Polymer Science 2011; 120(1): 557–562. doi: 10.1002/app.33219

11. Lu F, Liu H, Xiao C, et al. Effect of on-line stretching treatment on the structure and performance of polyvinyl chloride hollow fiber membranes. RSC Advances 2019; 9(12): 6699–6707. doi: 10.1039/c9ra00265k

12. Yan J, Xiao C, Ji D. Robust preparation and reinforcement mechanism study of PVDF hollow fiber membrane with homogeneous fibers. Polymer Testing 2022; 108: 107488. doi: 10.1016/j.polymertesting.2022.107488

13. Ji D, Gao Y, Wang W, et al. Green preparation of PVDF hollow fiber membranes with multiple pore structure via melt spinning method for oil/water separation. Journal of Environmental Chemical Engineering 2022; 10(5): 108337. doi: 10.1016/j.jece.2022.108337

14. Gu B, Du Q, Yang Y. Microporous hollow fiber membranes formed from blends of isotactic and atactic polypropylene. Journal of Membrane Science 2000; 164(1–2): 59–65. doi: 10.1016/S0376-7388(99)00204-5

15. Qiu Z, He C. Polypropylene hollow-fiber membrane made using the dissolution-induced pores method. Membranes 2022; 12(4): 384. doi: 10.3390/membranes12040384

16. Nouri M, Abbasi M, Aghebati T, Shirzadkhan M. Preparation and characterization of nanoclay loaded polyacrylonitrile hollow fiber membranes. The Journal of the Textile Institute 2022; 113(5): 952—960. doi: 10.1080/00405000.2021.1909862

17. Hill R, Walker EE. Polymer constitution and fiber properties. Journal of Polymer Science 1948; 3(5): 609–630. doi: 10.1002/pol.1948.120030501

18. Rein H. Fibres from synthetic polymers, herausgeg. von R. Hill. Elsevier Publishing Comp. Amsterdam, 1953, 1. Aufl. XV, 554 S., 179 Abb. gebd. sh. 80. Angewandte Chemie 1954; 66(4): 120. doi: 10.1002/ange.19540660415

19. Sinha R. Outlines of Polymer Technology: Manufacture of Polymers. PHI Learning Private Limited; 2004.

20. Perepechkin LP. Methods for obtaining polymeric membranes. Russian Chemical Reviews 1988; 57(6): 539. doi: 10.1070/RC1988v057n06ABEH003370

21. Grosberg AY, Khokhlow AR, de Gennes PG. Giant Molecules: Here, There, and Everywhere, 2nd ed. World Scientific Publishing; 2010.

22. Mark JE. Polymer Data Handbook, 2nd ed. Oxford University; 1999.

23. Voicu ŞI, Aldea F, Radut M, Nechifor G. Nanostructured polysulfone composite membranes. UPB Scientific Bulletin, Series B: Chemistry and Materials Science 2008; 70(3): 39–46.

24. Kheirieh S, Asghari M, Afsari M. Application and modification of polysulfone membranes. Reviews in Chemical Engineering 2017; 34(5): 657–693. doi: 10.1515/revce-2017-0011

25. Scott K. Handbook of Industrial Membranes, 2nd ed. Elsevier Science; 1995.

26. Sherazi TA, Sohn JY, Lee YM, Guiver MD. Polyethylene-based radiation grafted anion-exchange membranes for alkaline fuel cells. Journal of Membrane Science 2013; 441: 148–157. doi: 10.1016/j.memsci.2013.03.053

27. Zuo J, Bonyadi S, Chung TS. Exploring the potential of commercial polyethylene membranes for desalination by membrane distillation. Journal of Membrane Science 2016; 497: 239–247. doi: 10.1016/j.memsci.2015.09.038

28. Behboudi A, Ghiasi S, Mohammadi T, Ulbricht M. Preparation and characterization of asymmetric hollow fiber polyvinyl chloride (PVC) membrane for forward osmosis application. Separation and Purification Technology 2021; 270: 118801. doi: 10.1016/j.seppur.2021.118801

29. Bhran A, Shoaib A, Elsadeq D, et al. Preparation of PVC/PVP composite polymer membranes via phase inversion process for water treatment purposes. Chinese Journal of Chemical Engineering 2018; 26(4): 715–722. doi: 10.1016/j.cjche.2017.09.003

30. Ghosh AK, Mamtani VS, Adak AK. Carbon based nanofillers embedded fouling resistant polyvinyl chloride nanocomposite membranes for oil-water separation. International Journal of Scientific Research in Science, Engineering and Technology 2023; 10(3): 394–398.

31. Ji D, Gao Y, Wang W, et al. Green preparation of PVDF hollow fiber membranes with multiple pore structure via melt spinning method for oil/water separation. Journal of Environmental Chemical Engineering 2022; 10(5): 108337. doi: 10.1016/j.jece.2022.108337

32. Maiboroda AB, Petrov DV, Kichik VA, Starikov EN. Polyvinylidene fluoride hollow fiber membrane and its use for treatment of natural water. Petroleum Chemistry 2014; 54(7): 562–567. doi: 10.1134/S0965544114070081

33. Li Y, Nulens I, Verbeke R, et al. Tuning the porosity of asymmetric membranes via simple post-synthesis solvent-treatment for non-aqueous applications. Separation and Purification Technology 2019; 217: 147–153. doi: 10.1016/j.seppur.2019.02.012

34. Shao H, Wei F, Wu B, et al. Effects of annealing stress field on the structure and properties of polypropylene hollow fiber membranes made by stretching. RSC Advances 2016; 6(6): 4271–4279. doi: 10.1039/C5RA21785G

35. Yan SY, Wang YJ, Mao H, Zhao ZP. Fabrication of PP hollow fiber membrane via TIPS using environmentally friendly diluents and its CO2 degassing performance. RSC Advances 2019; 9(33): 19164–19170. doi: 10.1039/C9RA02766A

36. Guo X, Li Y, Liu Z, Xiao C. A new superhydrophobic polypropylene hollow fiber membrane preparation method and its application in the treatment of brine with high salt concentration. Journal of Environmental Chemical Engineering 2023; 11(1): 109054. doi: 10.1016/j.jece.2022.109054

37. Beevers RB. The physical properties of polyacrylonitrile and its copolymers. Journal of Polymer Science: Macromolecular Reviews 2003; 3(1): 113–254. doi: 10.1002/pol.1968.230030103

38. Wang LY, Yu LE, Lai JY, Chung TS. Effects of Pluronic F127 on phase inversion and membrane formation of PAN hollow fibers for air filtration. Journal of Membrane Science 2019; 584: 137–147. doi: 10.1016/j.memsci.2019.05.001


DOI: https://doi.org/10.59400/mtr.v1i1.103
(63 Abstract Views, 54 PDF Downloads)

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Vijay Suresh Mamtani, Asim Kumar Ghosh, Asis Kumar Adak

License URL: http://creativecommons.org/licenses/by/4.0/


This site is licensed under a Creative Commons Attribution 4.0 International License.